User's Manual

5
Precautions for use
1. Headphones should be stored in a dry and ventilated environment to avoid
contact with oil, water vapor, steam, moisture and dust, so as not to
affect product performance.
2. Avoid using irritating, organic solvents or items containing these
ingredients to clean the headphones.
3. The earphones should be correctly and professionally used according
to the requirements. Pay attention to the influence of the use environment
on the headphones. To ensure the smooth connection, it is recommended that
the distance between the mobile phone and the earphones be within 10
meters.
4. If the headset is not connected or the communication is not smooth,
etc., please do not disassemble the headset body and its accessories,
otherwise it will not be guaranteed.
5. Charge the earphone compartment, please use the standard car charger
or the charger specified by the company.
6. To ensure that you use the headset normally, make sure that the headset
is fully charged.
Tips:
When a earphone is connected to Bluetooth, the other earphone
is not enabled by default. For binaural use, please delete the paired
Bluetooth device and turn off the Bluetooth on the phone, and put the two
headphones into the charging compartment, then take out at the same time,
wait for about 5 seconds, the headset will automatically turn on and
pair.Please turn on the bluetooth at that timd,find the corresponding
Bluetooth device, click pair to use.
Long touch for 10 seconds, restore
the headset to factory settings.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Warning:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits