User's Manual

3
Start Guide
1.Bluetooth pair
Open the charging compartment, remove the earphones, the headset will
automatically turn on and pair, the matching process takes about 5 seconds
(the indicator light is: the headset is red and blue alternately flashing
quickly, after the successful pairing, the red and blue lights flash
slowly).
Find the corresponding Bluetooth name A1-TWS from the Bluetooth list
of the mobile phone and click pairing. The voice prompt connection is
successful in about 5 seconds. The headphone indicator flashes blue light
every 5 seconds.
When using one ear, just take one of the headphones, select A1-TWS
from the Bluetooth list of the phone and click Pair. After the pairing
is successful, you can use it.
Touching function area
2.charging indication
When charging the charging compartment, the red light of the charging
compartment flashes, and the red light is always on after being fully
charged.
When the earphone is placed in the charging compartment, the earphone
will be automatically charged. At this time, the blue light of the charging
compartment is always on, and the red light of the earphone is always on;
when the charging is full, the charging compartment and the earphone light
are off.