User's Manual

23
EN
FAQ
Q：How to reset the camera to factory default
setting?
A：Hold the reset button for about 10 seconds to reset
camera. Camera's default password: admin (To
improve the security, it is highly recommended that
you modify the password of the camera).
Q: Any tips for WiFi connection?
A : Camera support only 2.4G frequency signal, and
802.11b/g/n WiFi network.
B: The WiFi password should be less than 16 digits,
and can not contain special characters, such as @ ¥ !
etc. , suggest you to make a password that contains
only letters and number.
Please upgrade the APP to the latest version.
Q : No vision at night time?
A: ① Check if the IR function is enabled or not;
② Check if the IR LED is on or not;
③ Reset the camera back to factory setting;
④ Upgrade the camera to the latest firmware.
Q：Camera's picture is blurred?
A : ① Login the camera's web interface, adjust the
picture quality to HD mode;
②Clean the camera lens with a cotton swab.
③The WiFi signal will cause this problem, because it
may have low download speed. Please check your
WiFi download speed.