Quick Start Guide

– To pair and connect to a different device, you need to first disconnect the currently paired device.
– To disconnect the current device, press and hold down the Bluetooth button for 2 seconds.
– The Blue Light will begin flashing and the OontZ Cylinder is ready to pair and connect to your device.
Page 7
– Make sure your OontZ Cylinder battery has a sufficient charge, it is not able to connect when the charge is too low.
– Your device needs to be within 100 unobstructed feet of the OontZ Cylinder to pair and connect. If there is an issue
when connecting please move your device closer to the speaker, then pair and connect.
*Exception: certain devices may not automatically reconnect.
Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"
Turn ON your OontZ Cylinder
The OontZ Cylinder can be connected to one device at a time.
Flashing Blue Light
– The OontZ Cylinder is ready to pair and connect.
Solid Blue Light
– The OontZ Cylinder has automatically reconnected to the last device it was connected to and is ready to play.
– The OontZ Cylinder will automatically try to connect to the last device it was connected to each time it is turned
on and that device is within range.*
Pair & Connect ——Step 1