Quick Start Guide Cylinder Portable Bluetooth Speaker OontZ Dual Speaker Model Designed and Engineered By TheOontZ.
Table of Contents Pages In the Package ……………………………………………………………………………………………………………………………………………………………… Buttons ………………………………………………………………………………………………………………………………………………………………………… Lights …………………………………………………………………………………………………………………………………………………………………………… Connectors …………………………………………………………………………………………………………………………………………………………………… Battery Features …………………………………………………………………………………………………………………………………………………………… ……………………………………………………………………………………………………………………………………………………… Turning On and Off Pair & Connect ——Step 1 …………………………………
In the Package Quick-Start Guide Quick Start Guide Cylinder Portable Bluetooth Speaker OontZ Dual Speaker Model Designed and Engineered By TheOontZ.com USB Type C Charging Cable OontZ Cylinder Note: The USB Type-C charging cable is packed under the speaker.
Buttons Bluetooth / TWS Button Pause / Play button Power button Volume Down / Track Back Button Volume Up / Next track Button Volume Down Volume Up Press and Release to decrease volume one level Press and Release to increase volume one level Holding the button down will result in track back Holding the button down will result in track back Track Back Press and Hold for 2 Seconds Down Track Forward Press and Hold for 2 Seconds Down Important - Make sure the volume level is set high on your aud
Lights Lit Blue when speaker is on: – Flashing Blue speaker is in pairing mode – Solid Blue speaker is connected Lit Red when charging: – Slowly flashing Red battery is charging – Solid Red battery is fully charged Lit blue/green when the speaker is the second speaker connected in OontZ Dual Speaker Page 3
Connectors Rubber Flap – covers connectors – pull gently from the bottom to access connectors, it is a snug fit to provide water resistance USB Type C Charging Connector AUX IN Jack Note: The rubber flap needs to be closed to keep the speaker water resistant Page 4
Battery Features USB Type C Charging Connector – The rechargeable battery comes with a partial charge and the speaker is ready to play. – For maximum playtime, fully charge the battery. – You can play while charging. Low Charge Remaining – When the battery charge has less than 15% remaining the Red Light will begin flashing rapidly. – The volume will decrease to preserve the remaining battery charge. Music Play Time – Up to 12 hours on a full charge, at 2/3 volume.
Turning On and Off Turn ON – Press and hold the Power Button for 2 second Blue Light turns on – Flashing Blue The speaker is turned on and is in pairing mode – Solid Blue The speaker is turned on and has connected to an audio source device and is ready to play Turn OFF – Press and Hold Down the Power Button for 2 Seconds Blue Light will turn off Page 6
Pair & Connect ——Step 1 – Make sure your OontZ Cylinder battery has a sufficient charge, it is not able to connect when the charge is too low. – Your device needs to be within 100 unobstructed feet of the OontZ Cylinder to pair and connect. If there is an issue when connecting please move your device closer to the speaker, then pair and connect. Turn ON your OontZ Cylinder Flashing Blue Light – The OontZ Cylinder is ready to pair and connect.
Pair & Connect with Your Device -- Step 2 -— With Your iPhone, iPad, iPod, Smartphone, Tablet & Mobile Devices – Go to Settings > Bluetooth, check Bluetooth is on – Select 'OontZ Cylinder DS xxx' when it appears under DEVICES (xxx: 3 characters which are unique to your speaker) – Your device will connect in a few seconds – The Blue Light will turn solid blue and there will be a quiet chime – You can now play your audio wirelessly to your OontZ Cylinder Note: Your Smartphone or Tablet instructions may vary I
Pair & Connect——Step 2 — From Your Amazon Echo device To pair and connect the first time with an Amazon Echo device use the Alexa app on your device.
Pair & Connect -- Step 2 -— From Your Amazon Echo device (continued) We recommend to: 1)Keep the OontZ Cylinder plugged into a USB wall charger. It can remain on and available to play from the Amazon Echo device. -Or 2)Turn off the OontZ Cylinder when you are done listening. – Either turn off the speaker by pressing and holding down the power button for 3 seconds, – or say "Alexa, disconnect my speaker" and the OontZ Cylinder will automatically turn off after 15 minutes.
IPX7 WaterProof The OontZ Cylinder is Waterproof and it is IPX7 certified The perfect speaker for listening to your favorite music in any environment Perfect for taking to the lake, the beach, listening by the pool, listening in the shower IPX7 means the OontZ Cylinder is WaterProof and can handle water spray or being splashed and can handle being partially or fully submerged in water up to a maximum of 3 feet deep, for up to a maximum of 30 minutes.
Wireless Hands Free Personal Speakerphone – The Wireless Hands Free Personal Speakerphone feature works over Bluetooth with Smartphones and iPhones only – This feature is not supported when connected to PCs, laptops, Apple Macor other types of devices. To answer an Incoming Call / To End a Call – Press and Release the Pause / Play button To Reject an Incoming Call for 2 – Press and Hold Down the Bluetooth Button Seconds.
OontZ Dual Speaker - Connect two OontZ Cylinder Speakers Together Play your music wirelessly through both speakers up to 66 feet apart* Bluetooth for playing music Left Channel - Right Channel Left Channel for stereo separation Right Channel *Placing the speakers on the ground or having walls or obstructions between the speakers will significantly reduce the distance apart the two speakers can play together.
Connecting two OontZ Cylinder speakers together for Left Channel - Right Channel – Turn on both OontZ Cylinder speakers. – Pair and Connect one of the speakers with your device. When connected the Blue Light will be lit Solid Blue. This speaker will serve as the Play Control Speaker. The second speaker must not be connected to any device, its Blue Light needs to be flashing.
Two OontZ Cylinder Speakers connected for Left Channel - Right Channel Play Control Speaker Second Speaker Lit Blue Lit Green – Use the buttons on the Play Control Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the second speaker when paired together. – Use the Play Control Speaker for connecting to different audio devices via Bluetooth . The Bluetooth is disabled on the second speaker when paired together.
OontZ Dual Speaker - Important Notes Turning the speakers off – Turning the Play Control Speaker off will turn both speakers off. – Turning the second speaker off first will only turn that speaker off and the Play Control Speaker will play as a single speaker. Turning the speakers back on – Turn both speakers on and they will automatically try to connect to each other again. – Turn one of the speakers on and a device can connect with it, and play as a single speaker.
Customer Support If you have any issues with your OontZ Cylinder, our Customer Support Team wants to assist you. Please contact us at: TheOontZ.
Safety and Precautions 1. When the OontZ Clip speaker is plugged in to a charging source with the USB Type C Charging Cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2. Read and follow all instructions – All operating and use instructions should be followed. 3. Protect the USB Type C Charging Cable from being pinched, particularly at the connectors. 4. Unplug the USB Type C Charging Cable during lightning storms or when unused for long periods of time. 5.
Safety and Precautions (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
