Quick Start Guide

– Turn on both OontZ Clip speakers.
– Pair and Connect one of the speakers with your device. When connected the Blue Light will
be lit Solid Blue. This speaker will serve as the Play Control Speaker.
The second speaker must not be connected to any device, its Blue Light needs to be
flashing. If the second speaker has a solid Blue Light it is connected to a device and you
need to disconnect it by pressing and holding down the Dual speaker Button for 3
seconds until the Blue Light begins flashing.
-On the Play Control Speaker (speaker with solid Blue Light) press and hold down the Dual
speaker Button for 3 seconds until the Play Control Speaker says “Dual Pairing”.
– After a few seconds the Play Control Speaker will say “Left Channel” and the second
speaker will say “Right Channel”. The Play Control Speaker speaker light will remain solid
Blue and the second speaker light will be solid White. The OontZ Clip speakers will be
connected together for Left Channel - Right Channel and you are ready to play.
Page 18
Connecting two OontZ Clip speakers together for Left
Channel - Right Channel