Quick Start Guide

– Make sure your OontZ Clip battery has a sufficient charge, it is not able to
connect when the charge is too low.
– Your device needs to be within 100 unobstructed feet of the OontZ Clip to
pair and connect. If there is an issue when connecting please move your
device closer to the speaker, then pair and connect.
Turn ON your OontZ Clip
Flashing Blue Light
– The OontZ Clip is ready to pair and connect.
Solid Blue Light
– The OontZ Clip has automatically reconnected to the last device it
was connected to and is ready to play.
– The OontZ Clip will automatically try to connect to the last device
it was connected to each time it is turned on and that device is
within range.*
The OontZ Clip can be connected to one device at a
time.
– To pair and connect to a different device, you need to first
disconnect the currently paired device.
– To disconnect the current device, press and hold down the
Bluetooth button for 3 seconds.
– The Blue Light will begin flashing and the OontZ Clip is ready to
pair and connect to your device.
*Exception: certain devices may not automatically reconnect.
Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"
Page 12
Pair & Connect ——Step 1