Quick Start Guide CLIP Portable Bluetooth Speaker OontZ Dual Speaker Model Designed and Engineered By TheOontZ.
Table of Contents Pages In the Package Carabiner …………………………………………………………………………………………… 2 Resistant Strap Buttons Lights ……………………………………………………………………………………… 1 ……………………………………………………………………………………… 3 ……………………………………………………………………………………………… 4 ………………………………………………………………………………………………… 5 Connectors …………………………………………………………………………………………… 6 Play Horizontally or Vertically Battery Features ……………………………………………………………………… 7 …………………………………………………………………………………… 8 Charging the Battery ………………………………………………………………………………… 9-10 Turning On and
In the Package OontZ CLIP Quick-Start Guide USB Type C Charging Cable Note: The USB Type C Charging Cable is packed below the cardboard insert at the end of the triangle box.Slide out the insert to locate the cable.
Carabiner IMPORTANT: The carabiner of OontZ Clip is not for climbing.
Resistant Strap OontZ Clip comes equipped with an easy-to-use, tear resistant silicone strap. Secure it to your backpack, beach cooler, or handlebars, and the reliable strap will hold tight through shocks and shakes. Tips：suit for bike handlebar,not recommend use on exceed this size.
Buttons Bluetooth/play/pause/speaker phone/dual speaker button (Multi-function) Button Power Button – Press and Release to Pause/Play Button (Dual Function) Button (Dual Function) Volume Down Volume Up – Press and Release to decrease volume one level; repeat until volume lowers to desired level – Press and Release to increase volume one level; repeat until volume raises to desired level – Holding the button down will result in track back – Holding the button down will result in track back Track B
Lights Lit Blue when speaker is on: – Flashing Blue speaker is in pairing mode – Solid Blue speaker is connected Lit White/blue when the speaker is the second speaker connected in OontZ Dual Speaker – With a second OontZ CLIP – speaker (sold separately) you can wirelessly connect both speakers together to play with OontZ Dual Speaker. – For OontZ Dual Speaker instructions please see page 18.
Connectors Built-in Mic for Speakerphone USB Type C Charging Connector Note: The ALARM will sound when the USB is charged after it is flooded.
Play Horizontally or Vertically Play Horizontally Controls on side Play Vertically Controls on top Page 7
Battery Features USB Type C Charging Connector – The rechargeable battery comes with a partial charge and the speaker is ready to play. – For maximum playtime, fully charge the battery. – You can play while charging. Low Charge Remaining – When the battery charge has less than 15% remaining the Red Light will begin flashing rapidly. – The volume will decrease to preserve the remaining battery charge. Music Play Time – Up to 12 hours on a full charge, at 2/3 volume.
Charging the Battery Lit Red when charging: – Slowly flashing Red battery is charging – Solid Red battery is fully charged – Insert the small end of the USB Type C Charging Cable into the USB Type C Charging Connector as shown. – Insert the larger end of the USB Type C Charging cable into a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 8). Charging Time: Up to 3 hours to fully charge a low battery.
Charging the Battery (continued) Insert the larger end of the USB Type C Charging Cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V 1.0A maximum), or a USB port on your laptop/computer to charge the OontZ Clip battery. Note: When charging with Type C，if there is alarm sound“dododo”means there have water left on the Type-C socket. Pls remove the water with tissue and re-charging. * Only use a USB wall charger that is UL listed.
Turning On and Off Turn ON – Press and hold the Power Button for 1 second Red Light turns on – will turn off after 3 seconds if playing from battery power Blue Light turns on – Flashing Blue The speaker is turned on and is in pairing mode – Solid Blue The speaker is turned on and has connected to an audio source device and is ready to play Turn OFF – Press and Hold Down the Power Button Seconds for 3 Blue Light will turn off Page 11
Pair & Connect ——Step 1 – Make sure your OontZ Clip battery has a sufficient charge, it is not able to connect when the charge is too low. – Your device needs to be within 100 unobstructed feet of the OontZ Clip to pair and connect. If there is an issue when connecting please move your device closer to the speaker, then pair and connect. Turn ON your OontZ Clip Flashing Blue Light – The OontZ Clip is ready to pair and connect.
Pair & Connect with Your Device——Step 2 — With Your iPhone, iPad, iPod, Smartphone, Tablet & Mobile Devices – Go to Settings > Bluetooth, check Bluetooth is on – Select 'OontZ Clip xxx' when it appears under DEVICES (xxx: 3 characters which are unique to your speaker) – Your device will connect in a few seconds – The Blue Light will turn solid blue and there will be a quiet chime You can now play your audio wirelessly to your OontZ Clip Note: Your Smartphone or Tablet instructions may vary Important – The v
Pair & Connect -- Step 2 — From Your Amazon Echo device To pair and connect the first time with an Amazon Echo device use the Alexa app on your device.
IPX7 WaterProof The OontZ Clip is Waterproof and it is IPX7 certified The perfect speaker for listening to your favorite music in any environment Perfect for taking to the lake, the beach, listening by the pool, listening in the shower IPX7 means the OontZ Clip is WaterProof and can handle water spray or being splashed and can handle being partially or fully submerged in water up to a maximum of 3 feet deep, for up to a maximum of 30 minutes Important Safety Precaution: When the OontZ Clip speaker is plugged
Wireless Hands Free Personal Speakerphone – The Wireless Hands Free Personal Speakerphone feature works over Bluetooth with Smartphones and iPhones only – This feature is not supported when connected to PCs, laptops, Apple Mac or other types of devices. To answer an Incoming Call / To End a Call – Press and Release the Bluetooth Button To Reject an Incoming Call – Press and Hold Down the Bluetooth Button Seconds.
OontZ Dual Speaker - Connect two OontZ Clip Speakers Together Play your music wirelessly through both speakers up to 66 feet apart* Left Channel - Right Channel Bluetooth for playing music for stereo separation Left Channel Right Channel *Placing the speakers on the ground or having walls or obstructions between the speakers will significantly reduce the distance apart the two speakers can play together Page 17
Connecting two OontZ Clip speakers together for Left Channel - Right Channel – Turn on both OontZ Clip speakers. – Pair and Connect one of the speakers with your device. When connected the Blue Light will be lit Solid Blue. This speaker will serve as the Play Control Speaker. The second speaker must not be connected to any device, its Blue Light needs to be flashing.
Two OontZ Clip Speakers connected for Left Channel - Right Channel Play Control Speaker Second Speaker Lit Blue Lit White –Use the buttons on the Play Control Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the second speaker when paired together. –Use the Play Control Speaker for connecting to different audio devices via Bluetooth . The Bluetooth is disabled on the second speaker when paired together.
OontZ Dual Speaker - Important Notes Turning the speakers off – Turning the Play Control Speaker off will turn both speakers off. – Turning the second speaker off first will only turn that speaker off and the Play Control Speaker will play as a single speaker. Turning the speakers back on – Turn both speakers on and they will automatically try to connect to each other again. – Turn one of the speakers on and a device can connect with it, and play as a single speaker.
Resetting Your OontZ Clip Step 1: Remove the USB Type C Charging Cable if connected. Step 2: Press and hold down the Power button and button together for 1 second, then release. Step 3: The speaker has now been reset and you can turn it on.
Troubleshooting For issues with your OontZ Clip, please view our troubleshooting tips at: TheOontZ.com/troubleshooting and select the OontZ Clip Dual Speaker Customer Support If you have any issues with your OontZ Clip, our Customer Support Team wants to assist you. Please contact us at: TheOontZ.com/support and fill in our customer support form.
Safety and Precautions 1. When the OontZ Clip speaker is plugged in to a charging source with the USB Type C Charging Cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2. Read and follow all instructions – All operating and use instructions should be followed. 3. Protect the USB Type C Charging Cable from being pinched, particularly at the connectors. 4. Unplug the USB Type C Charging Cable during lightning storms or when unused for long periods of time. 5.
Safety and Precautions (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
