User's Manual

You can control the play functions from your device or from the OontZ Angle 3XL.

Please keep your device volume setting above 60%.

Important Note: If you have previously turned the volume down on your OontZ Angle 3XL you may need to

increase it to full volume in order to reach maximum overall volume, even if your device volume is already at

100%. You can press and hold down the Volume + Button (11) until the Bluetooth Indicator Light (3) ﬂashes

to indicate that the speaker is at maximum volume. You can then ﬁne tune the volume from your device.

To increase volume, press and release the Volume + Button (11).

Press and hold down the button to increase volume multiple levels.

To decrease volume, press and release the Volume – Button(10).

Press and hold down the button to decrease volume multiple levels.

To skip to the beginning of a track, press and release the Back/Previous

Track Button (6) . Press and release again to go to previous track.

To pause or play, press and release the Pause/Play Button (8).

To skip to the next track, press and release the Next Track Button (9).

Playing from your Bluetooth device: smartphone, iPhone

, tablet, iPad

, Bluetooth iPod

- PAGE 6 -

Playing from your Laptop, Computer and non-Bluetooth devices using AUX IN and the 3.5mm audio cable

Make sure your OontZ Angle 3XL has suﬃcient charge or connect to a charging source. Plug one end of

the included 3.5mm audio cable into the AUX IN Jack (15) on the back of your speaker and plug the

other end into the headphone/audio out jack on your audio source. Once connected, the Bluetooth

Indicator Light (3) will turn green and you will hear the voice prompt: “AUX IN Source”

Note: When in AUX IN mode the next track and back/previous track controls are controlled from the device

only. In AUX IN mode the next track and back/previous track buttons will not function on the OontZ Angle 3XL.

There is no speakerphone support in AUX IN mode.

- PAGE 7 -