User's Manual

Charging your
OontZ Angle 3XL
To charge your OontZ Angle 3XL, plug the
connector end of the included power
adapter into the Charging Jack (16). Plug
the other end into a wall outlet. You can
play your speaker while charging.
- When charging, the Charging Indicator
Light (1) will flash red, slowly.
- When fully charged it will turn solid red.
- The speaker will take about 4 hours to
fully charge. We recommend you fully
charge your speaker during the first use.
Note: When playing from battery power the
OontZ Angle 3XL will turn off after 30 minutes
of not playing audio.
4
Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device:
smartphone, iPhone
TM
, tablet, iPad
TM
, Bluetooth iPod
TM
5
Step 1 – To turn on your OontZ Angle 3XL press and release the ON/OFF Button (2). The Bluetooth
Indicator Light (3) will flash blue and you will hear the voice prompt: “Ready for connecting”. This
indicates that the speaker is in pairing mode and it is ready to pair and connect to your device.
Step 2 – Enable the Bluetooth function on your device and then search/scan for
the OontZ Angle 3XL. When “OontZ Angle 3XL” appears on the Bluetooth device
list, select it and your device will pair and connect to the speaker. Make sure
your device indicates that it is connected to “OontZ Angle 3XL” in your device
list. If your device requests a password, enter “0000”.
Step 3 – The Bluetooth Indicator Light (3) will turn solid blue to indicate that
the OontZ Angle 3XL is paired and connected to your device and you will hear
the voice prompt: “Connected”.
You can now play wirelessly from your device.
- PAGE 4 -
Bluetooth device
OontZ Wireless Dual Pairing
TM
for playing from a second OontZ Angle 3XL
To unpair two speakers from Wireless
Dual Pairing
TM
mode: Turn on the Speaker
B. The Wireless Dual Pairing Light (White) (7)
will be solid white on Speaker B. Press and
hold the Pause/Play (8) button for 3 seconds
on Speaker B. and it will return to single
speaker mode.
9
A
B
In OontZ Wireless Dual Pairing
TM
mode, you can play from two OontZ Angle 3XL speakers simultaneously in Indoor stereo mode or Outdoor mode.
Step 1 – Make sure both OontZ Angle 3XL speakers are on and in close proximity to each other.
Step 2 – Press and hold the Pause/Play (8) button for 3 seconds on one of the OontZ Angle 3XL speakers that will be Speaker B. The Wireless Dual Pairing
Light (7) will flash white and you will hear the voice prompt: “Searching”.
Step 3 – Once the two speakers are paired together, the Wireless Dual Pairing Light (7) will turn solid white on each speaker to indicate that the two OontZ
Angle 3XL speakers are paired.
Step 4 – Pair your device via Bluetooth to Speaker A. Please refer to section 5 : “Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device: smartphone,
iPhone
TM
, tablet, iPad
TM
, Bluetooth iPod
TM
”. You can also use a non-Bluetooth device while in OontZ Wireless Dual Pairing
TM
mode by connecting the device via
AUX IN cable to Speaker A. Please refer to section 7 : “
Playing from your Laptop, Computer and non-Bluetooth devices using AUX IN and the 3.5mm audio cable ”.
- PAGE 9 -