User Guide
Table of Contents 1 2 3 4 5 Overview of the OontZ Angle 3XL In the Package The Buttons and Connectors Charging your OontZ Angle 3XL Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device: smartphone, iPhoneTM, tablet, iPadTM, Bluetooth iPodTM 6 Playing from your Bluetooth device: smartphone, iPhoneTM, tablet, iPadTM, Bluetooth iPodTM 7 Playing from your Laptop, Computer and non-Bluetooth devices using AUX IN and the 3.
The Buttons (top) and Connectors (rear) 1 2 3 4 1. Charging Indicator Light (Red) - Flashes red when charging, solid red when fully charged 2. On/Off Button - Press and release to turn on. Press and hold for two seconds to turn off. 3. Bluetooth Indicator Light – - Flashes blue when in pairing mode. - Solid blue when connected over Bluetooth. - Solid green when the 3.5mm cable is inserted into the AUX IN Jack 4.
Charging your OontZ Angle 3XL To charge your OontZ Angle 3XL, plug the connector end of the included power adapter into the Charging Jack (16). Plug the other end into a wall outlet. You can play your speaker while charging. - When charging, the Charging Indicator Light (1) will flash red, slowly. - When fully charged it will turn solid red. - The speaker will take about 4 hours to fully charge. We recommend you fully charge your speaker during the first use.
6 Pairing and Connecting the OontZ Angle 3XL to your Bluetooth device: smartphone, iPhoneTM, tablet, iPadTM, Bluetooth iPodTM (continued) Note 1. The OontZ Angle 3XL can only be connected to one device at a time. You will need to disconnect the first device from the OontZ Angle 3XL before trying to pair to another device: Press and hold the Bluetooth button for 3 to 5 seconds for the speaker to enter pairing mode, it will disconnect from the current device when entering pairing mode.
7 Playing from Laptops, Computers and non-Bluetooth devices using AUX IN and the 3.5mm audio cable Make sure your OontZ Angle 3XL has sufficient charge or connect to a charging source. Plug one end of the included 3.5mm audio cable into the AUX IN Jack (15) on the back of your speaker and plug the other end into the headphone/audio out jack on your audio source.
8 Wireless Hands-Free Personal Speakerphone When connected by Bluetooth to a smartphone or iPhone that supports Hands-Free Profile (HFP), the OontZ Angle 3XL will have Wireless Hands-Free Speakerphone. To answer an incoming call, press and release the Bluetooth Button (4). To end a call, press and release the button. To reject a call, press and hold down the button for about two seconds. You can use your smartphone to switch between using Hands-Free Speakerphone and the device.
9 OontZ Wireless Dual PairingTM for playing from a second OontZ Angle 3XL In OontZ Wireless Dual PairingTM mode, you can play from two OontZ Angle 3XL speakers simultaneously in Indoor stereo mode or Outdoor mode. Step 1 – Make sure both OontZ Angle 3XL speakers are on and in close proximity to each other. Step 2 – Press and hold the Pause/Play (8) button for 3 seconds on one of the OontZ Angle 3XL speakers that will be Speaker B.
Indoor/Outdoor Mode Indoor Mode To choose which mode to play in, slide the Indoor/Outdoor Switch (13) either left or right. While in Indoor mode, the two speakers will play in stereo sound. Your speakers will hint “Left Channel” and “Right Channel” to indicate the role of each OontZ Angle 3XL. LEFT RIGHT In Outdoor mode, both speakers will play with identical audio outputs, unlike Indoor mode. Note 1: Speakers must be in the same mode (Indoor or Outdoor) for both to play simultaneously.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Product Safety and Precautions Read these instructions – All the safety and operating instructions should be read before this product is operated. Keep these instructions – The safety and operating instructions should be retained for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions – All operating and use instructions should be followed.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
