User's Manual

Page 18
Poor sound quality when connected over Bluetooth
• Your Bluetooth device may be out of range, move closer within 30 unobstructed feet.
• Remove the OontZ Angle 3 PLUS from the Bluetooth device list on your source device, restart your source device, and then re-pair and connect
to the speaker.
• Turn your OontZ Angle 3 PLUS off and back on.
• Some devices need to have their WIFI turned off to improve audio quality over Bluetooth.
No audio playing from the OontZ Angle 3 Plus when connected with the 3.5mm audio cable
• Make sure the 3.5mm audio cable is fully inserted into the OontZ Angle 3 PLUS and Device. Some devices have cases that prevent a proper fit
and need to be removed to connect. Make sure your device is on and playing music.
• Increase the volume level on the OontZ Angle 3 PLUS and the device.
Poor sound quality when connected with the 3.5mm audio cable
• Reduce the volume level on the AUX source.
• Remove the charging cable while playing.
No response when pressing any button or speaker will not turn off
• Reset the OontZ Angle 3 PLUS, follow the reset instructions on page 20.
Troubleshooting