User's Manual

-- For Windows systems
• Turn off the OontZ Angle 3 PLUS speaker. Please go to the Bluetooth device list and if the OontZ Angle 3 PLUS is listed please remove it. With
the OontZ Angle 3 PLUS removed or if was not listed, restart your Computer. Next reset the OontZ Angle 3 PLUS, following the instructions on
page 20. After you have reset your speaker, try to pair and connect again from your Computer. For pairing and connecting guide for your
Windows system go to TheOontZ.com/Pairing.
• If your Windows system displays an error message requesting a driver, you need to update your computer's Bluetooth driver. The OontZ Angle 3
PLUS does not require a special driver itself and there is no driver for it. Go to the support site for your system manufacturer and specific model
and select the Bluetooth driver. Download and install the Bluetooth driver, restart your system and try again to pair and connect to your OontZ
Angle 3 PLUS speaker. For pairing and connecting guide for your Windows system visit TheOontZ.com/Pairing.
No audio playing from the OontZ Angle 3 PLUS when connected over Bluetooth
• Reset the OontZ Angle 3 PLUS, follow the reset instructions on page 20.
• Remove the OontZ Angle 3 PLUS from the Bluetooth device list on your audio source device, restart your source device, and then re-pair and
connect to the speaker.
• Make sure the volume is up on your OontZ Angle 3 PLUS and your audio source device.
• Make sure your Bluetooth device is playing audio, and is not paused and volume is up.
• Your Bluetooth device may be out of range, move closer within 30 unobstructed feet.
• Turn your OontZ Angle 3 PLUS off and back on.
• Some apps have their own volume setting. Please check the app to make sure the volume is not on mute and the volume is up.
Page 17
Cannot pair or connect to the OontZ Angle 3 PLUS (continued)
Troubleshooting