Quick Start Guide Koontz Angle 3 Pro The Waterproof Bluetooth Speaker Incredible Sound, Powerful Volume, 100 Foot Wireless Bluetooth Range Designed and Engineered By CAMBRIDGE SOUND WORKS.
In the Package Quick-Start Guide USB Type C Charging Cable aa f/— }» 3.
Table of Contents Pages Buttons, Built-in Mic, Lights, AN CONNECTIONS: ++ 1-4 Battery Features and Charging the Battery frees ereeteneanereeneneas opener Nero Renee esornonerasnenaen 5-7 Turning On ang Off iii iit 8 Pair & Connect With YOU Device « «+ 9-12 Koontz Wireless Dual Stereo Connect Two Koontz Angle 3 Pro Speakers Together. 13-19 IP Water RESISTANCE 20 Talk to Sir Wireless Hands Free Personal Speakerphone 21 To Play with Non-Bluetooth Devices Use a 3.
Source Play/Pause Buttons & © reds and Release n Press ond Release Bluetooth Volume Pause/Play {Dual Function) Press to increase volume Built-in Mic and eon @ > Top of Speaker 0) @: «> H®O® b Track —5 Poser < Forward Volume Down Track Press and Release to go Press to decrease volume Back to next track. Built-In Mic Press and Release to go For Sir and Speakerphone to the start of track.
Green Light lit when connected to Koontz app on iPhone or Smartphone running the Li h Android operating system. Ig ts Green Light lit when Aux|n is selected White/Orange Light Lit when speaker is in Koontz Wireless Dual Stereo . With a second Koontz Angle 3 Pro Speaker {sold separately) you can tirelessly connect No Light lit when Bluetooth is selected both speakers together to play with Koontz Wireless Dual Stereo.
Rubber Flap Opening Rubber Flap covers connectors pull the tab from the top to access connectors, it is a snug fit as part of the waterproofing Closing Rubber Flap Align the Rubber Flap directly over the connector bay. Push the Rubber Flap straight in until the edges are even with the edges of the connector bay. IMPORTANT: The rubber flap needs to be closed before the speaker is exposed to water. The speaker is not water resistant or waterproof when the flap is open.
Connectors typecast— — AUXIN Jack Charging Connector — OUT VELMA Back of Speaker IMPORTANT: The rubber flap needs to be closed before USB Power Bank the speaker is exposed to water. Use for keeping your Smartphone or iPhone charged while playing. The speaker is not water resistant or Use to power your Echo Input. waterproof when the flap is open.
Battery Features The rechargeable battery comes with a partial Music Play Time charge and the speaker is ready to play. Up to 15 hours on a full charge, at 2/3 volume. . ji Louder volumes will reduce the battery play time. For maximum playtime, fully charge the battery. You can play while charging. Power Saving Feature When playing from battery power the Koontz Angle 3 Pro will tum off after Low Charge Remaining 30 minutes of not playing audio to conserve the battery charge.
Charging the Battery Red Light lit when charging: Slowly flashing Red battery is charging Solid Red battery is fully charged Insert the small end of the USB Type C Charging Cable into the Charging Connector as shown. Insert the larger end of the USB Type C Charging cable into a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 7). | Charging Time hours to fully charge a low battery.
Charging the Battery (continued) / Insert the larger end of the USB Type C Charging Cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V == 2.4A maximum), or a USB port on your laptop/computer to charge the Koontz Angle 3 Pro battery. * Only use a USB wall charger that is UL listed. A UL listed USB wall charger will have the logo w printed on it.
Turning On and Off Top of Speaker ~Blue Light will turn on after Red Light turns Flashing Blue The speaker is in pairing mode Solid Blue Your device has connected with the Koontz Angle 3 Pro and is ready to play Press and Release the Power Button (1) OO Red Light will turn on for 3 seconds and then turn off Turn OFF Press and Hold Down the Power Button (! for 2 Seconds Blue Light will turn off Page
Top of Speaker Pair & Connect with Your Device Step 1 © ® ®O0O Turn ON your Koontz Angle 3 Pro ob Flashing Blue Light The Koontz Angle 3 Pro is ready to pair and connect. Solid Blue Light Your device has connected to the Koontz Angle 3 Pro and is ready to play. The Koontz Angle 3 Pro allows the last device it was connected with to automatically reconnect with the speaker each time the speaker is turned on and that device is within range.* The Koontz Angle 3 Pro can be connected to one device at a time.
Pair & Connect with Your Device -Step 2 —~ With Your iPhone, iPad, or iPod — With Your Smartphone, Tablet & Mobile Devices Go to Settings > Bluetooth, check Bluetooth Settings > Bluetooth, check Bluetooth is on Select ‘Entanglement 3 Pro ocd when it appears under Scan or Search and select 'Entanglement 3 Pro xo< when it appears DEVICES (oc: 3 characters which are unique to your speaker) under AVAILABLE DEVICES (ocx: 3 characters which are unique to Your device will connect in a few seconds your speaker) The
Pair & Connect with Your Device -Step 2 -With Your Amazon Echo or Amazon Echo Dot To pair and connect with the Amazon Echo or Amazon Echo Dot the first time use the Alexei app. For other Amazon Alexei devices please refer to their pairing and connecting instructions. Open the Alexei app Select your Amazon Echo device under 'Devices' by pressing it in lower left corner of the screen.
Pair & Connect with Your Device Step 2 -With Your Amazon Echo or Amazon Echo Dot (continued) Important Note: When the Koontz Angle 3 Pro is playing from battery power and connected to the Amazon Echo device, the speaker will remain on and it will not automatically turn off after 30 minutes of not playing audio. This will use up the battery charge. We recommend to: 1) Keep the Koontz Angle 3 Pro plugged into a USB wall charger. It can remain on and available to play from the Amazon Echo device.
Koontz Wireless Dual Stereo Connect two Koontz Angle 3 Pro speakers together Play your music tirelessly through both speakers up to 100 feet apart® Bluetooth . — for playing music Left Channel Right Channel \ mmm CEE EE EE EE IRE) i Audio Cable for stereo separation J Audio Ta eo Left Channel Right Channel Bluetooth bricklaying f Dual Stereo Audio Cable for full stereo in separate areas \ T ie audio from video Full Stereo Full Stereo *Placing the speakers on the ground or having walls or obstructions betwee
Connecting two Koontz Angle 3 Pro speakers together for Left Channel Right Channel (Without using Koontz app) -Turn on both Koontz Angle 3 Pro speakers. ow Pair and Connect one of the speakers with your device. When connected the Bluetooth Button light will be lit Solid Blue. This speaker will serve as the Play Control Speaker. ~The second speaker must not be connected to any device, its Bluetooth Button light needs to be flashing.
Two Cont Z Angle 3 Pro Speakers connected for Left Channel! Right Channel {Without using Koontz app) Play Control Speaker Speakerphone y P Topaz speaker Second Speaker Left Channel OC HOO White Light lit solid —— — Blue Light lit solid White Light it solid Blue Light OFF Use the buttons on the Play Control Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the second speaker when paired together.
Connecting two Koontz Angle 3 Pro speakers together for Left Channel Right Channel {Using Koontz app) Tum on both Koontz Angle 3 Pro speakers. (l) Open the Koontz app and connect with one of the Koontz Angle 3 Pro speakers. (See page 24 for instructions on using the Koontz app) Pair and Connect the speaker with your device that is connected with the Koontz app as indicated by the Play/Pause Button being lit solid Green. When connected to your device the Bluetooth Button light will be lit solid Blue.
Two Koontz Angle 3 Pro Speakers connected for Left Channel Right Channel {Using Koontz app) The Koontz app allows changing to Dual Stereo from Left Channel Right Channel and back to Left Channel Right Channel from Dual Stereo. Refer to Page 29 for instructions on using the Koontz app for Koontz Wireless Dual Stereo. The second speaker will indicate whether the mode is Left Channel Right Channel (Play/Pause Button lit solid White) or Dual Stereo (Play/Pause Button lit solid Orange).
Changing to Dual Stereo from Left Channel Right Channel Use Dual Stereo when placing the two speakers in different areas, and both speakers will play in full stereo. To set both speakers for Dual Stereo they must first be connected together for Left Channel Right Channel (see page 14 or page 16 if using the Koontz app). With the speakers connected together for Left Channel Right Channel, you can change the speakers to Dual Stereo.
Koontz Wireless Dual Stereo Important Notes Turning the speakers off Turning the Play Control Speaker off will turn both speakers off. Turning the second speaker off first will only turn that speaker off and the Play Control Speaker wil play as a single speaker. Turning the speakers back on Turn both speakers on and they will automatically try to connect to each other again. Turn one of the speakers on and a device can connect with it, and play as a single speaker.
IP Water Proof The Koontz Angle 3 Pro is Waterproof and it is IP certified The perfect speaker for listening to your favorite music in any environment Perfect for taking to the beach and listening by the pool IP means the Koontz Angle 3 Pro is Water Proof and can handle water spray or being splashed and can handle being partially or fully submerged in water up to a maximum of 3 feet deep, for up to a maximum of 30 minutes The rubber flap needs to be closed for the speaker to be waterproof and rustproof.
Talk to Sir on your iPhone or iPad through the Koontz Angle 3 Pro This feature works when connected to an iPhone or an iPad over Bluetooth.
To Play with Non-Bluetooth Devices Use a 3.5mm Stereo Audio Cable Turn ON your Koontz Angle 3 Pro(l) Plug one end of the included 3.5mm stereo audio cable into the AUX IN jack on the speaker. Press the Source Button and the Source Button light will turn solid Green. ) OUT SIA Plug the other end of that 3.5mm stereo audio cable into the headphone jack on your device. Make sure both ends of the cable are fully inserted You are now ready to play.
Reset Function Top of Speaker © @C> HOO Step 1: Remove the USB Type C Charging cable and 3.5mm Audio cable, if connected. Step 2: With the Koontz Angle 3 Pro on, press the Power button ow and Volume + together and release. The speaker will then turn off. Step 3: The speaker has now been reset and you can turn it on.
Using the Koontz App Control the different functions of your Zoom Angle 3 Pro from your iPhone or Smartphone running the Android operation system Download the Zoom app from the Apple App Store® or Google Play™ Store 1) Open the Apple App Store® or Google Play™ Store on your iPhone or Smartphone running the Android operating system. 2) Search for the “Koontz” app and install. 3) After the app has been installed the “Koontz" app will appear on your iPhone or smartphone.
Using the Koontz App (Continued) To pair and connect your Koontz Angle 3 Pro with the Koontz app Turn on your Koontz Angle 3 Pro speaker Launch the Koontz app and the Home screen will appear Select the Menu #2 in the upper left hand corner of the Koontz app and the Menu screen will appear Select ‘Speakers’ from the Menu and the Speaker screen will appear Continue to the next page for instructions pairing and connecting to the Koontz Angle 3 Pro speaker.
Using the Koontz App (Continued) Pairing and connecting the Koontz app and Koontz Angle 3 Pro Angle 3 Pro icon is Grey Press the Grey speaker icon on the app to pair and connect the app with the Koontz Angle 3 Pro Your Koontz Angle 3 Pro will connect in a few seconds The Grey speaker icon will turn Blue and the Play/Pause Button [» on the Koontz Angle 3 Pro will turn solid Green Your device is connected to the Koontz Speaker app and the app is ready to use.
Using the Koontz App (Continued) The Koontz app allows you to control different speakers. To utilize the app for a different Koontz Angle 3 Pro speaker. Select the Menu = in the upper left hand corner of the app and select ‘Speakers’ from the menu Select the desired speaker from the available speakers icons shown Speaker icon is Blue this speaker is already connected to the Cont Z app Speaker icon is Grey press and the app will pair and connect to this Cont Z speaker.
Using the Koontz App (Continued) Select the Menu #2 in the upper left hand corner of the app and select ‘EY from the menu to access the Speaker Equalizer screen or press ‘Volume Control’ to from the menu to access the Volume Control screen. Press ‘Sync Volume’ to have the volume on the connected device control the volume of the Koontz Angle 3 Pro. The Left slider adjusts the Bass and the Right slider the Treble. Press “Default EQ” to set the EQ to the default setting for the Koontz Angle 3 Pro.
Using the Koontz App (Continued) Select the Menu = in the upper left hand corner of the app and select ‘Dual Stereo’ from the menu.
Using the Koontz App (Continued) Select the Menu & in the upper left hand corner of the app and select ‘Audio Source’ from the menu. Press “Aux In” to change the audio source for the Koontz Angle 3 Pro to the device connected to the Koontz Angle 3 Pro Aux In jack. The Source Button on the Koontz Angle 3 Pro will be lit solid Green. Press “Bluetooth” to change the audio source for the Koontz Angle 3 Pro to Bluetooth.
Using the Koontz App (Continued) Select the Menu = in the upper left hand corner of the app and select ‘Support’ from the menu to access the Support screen or press ‘Feedback’ to from the menu to access the Feedback screen. fg If there is a new version of firmware for the Koontz Angle 3 Pro it will be displayed under ‘New Firmware Version’ including the new version number of the update. Press “Manual” to display the latest version of the online manual for the Koontz Angle 3 Pro.
Customer Support If you have a question about your Koontz Angle 3 Pro or experience an issue with the speaker, our Customer Support Team wants to assist you.
Safety and Precautions 1. When the Koontz Angle 3 Pro speaker is plugged in to a charging source with the USB Type C Charging Cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock. 2. Read and follow all instructions All operating and use instructions should be followed. 3. Protect the USB Type C Charging Cable from being pinched, particularly at the connectors. 4.
Safety and Precautions (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Koontz Bluetooth Adapter ~~ Koontz Bluetooth Speaker Sold separately Official Mounting Strap + Transmit Low Latency wireless audio from Sold separately your TV and Video device to your Koontz + Securely strap your Koontz speaker Angle 3 Pro.
