Quick Start Guide

• Turn the headset off.
• Check your Bluetooth source device and be sure you have found the secon that allows you
to discover new Bluetooth products. If you see the headset on the list, but cannot connect,
you may need to try and synch again. To start fresh, with your Bluetooth device, select
“Forget this device,” to remove the “CA Essenal BT Headset” from the list. You may need to
turn off the Bluetooth funcon on your device to fully clear your list.
• Turn the headset back on, the LED light will alternately flash red and blue indicang the
headset is ready to pair and connect
• Return to your source device, and re-enable the Bluetooth funcon. Look for the
“CA Essenal BT Headset” to show back up on the list.
• Select the headset on your screen, and listen for the audible sound to confirm pairing.
Frequently Asked Questions
Last Connected Device was your iPhone, Tablet, Smartphone
• If the headset does not automacally reconnect with your iPhone, Tablet or Smartphone,
you may need to go into your device’s Bluetooth sengs and re-select the headset to
reconnect.
• Be sure to check your room environment. Today’s Bluetooth technology has a designed
limit of approximately 100 unobstructed feet, line of sight. Your best results will be when
your source device and headset are in the same room. Extremely large rooms, or rooms
with lots of wireless electronics, wi-fi routers, radio transmiers, etc, may affect your
ability to pair and connect.
• Check for obstrucons, walls or other objects that might impede the Bluetooth signal.
• Try returning to the source device to a closer proximity with your headset.
Bluetooth connecon
Cannot connect with your iPhone, Tablet, or
Smartphone
Frequently Asked Quesons Possible Soluons
Bluetooth connecon
Cannot connect with the last connected device
when returning
Page 9