User Manual

Troubleshooting & Customer Support
OontZ Angle 3 Plus will not turn on
For assistance with questions or any issue with your OontZ Angle 3 Plus that is not answered in the troubleshooting
tips below, please contact us by visiting: TheOontZ.com/support and fill out our customer service form
• The battery may have become fully drained. Charge the OontZ Angle 3 Plus using a USB wall charger from a Smartphone/iPhone or tablet for at least
15 minutes, then press the power button to turn the speaker on. Then continue charging the battery
• Reset the OontZ Angle 3 Plus, follow the reset instructions on page 15
Cannot pair or connect to the OontZ Angle 3
• Check that your OontZ Angle 3 Plus has a sufficient battery charge, the speaker may not connect when the battery has a low charge. Connect the
speaker to a charging source and try again to pair and connect
• Your source device may be out of range. Move it closer to within 30 unobstructed feet of your speaker
• Check the Bluetooth LED light (Blue) to make sure it is flashing. If it is solid blue the OontZ Angle 3 Plus is already connected to another source
device. The OontZ Angle 3 Plus can be connected to one source device at a time. You need to disconnect the connected source device then you can
connect to the next source device. Please see instructions on page 8
• Your source device may have a temporary Bluetooth connection issue please try the following steps which can resolve this: (continued next page)
Page 12