User's Manual
Table Of Contents
Opera
1. Plug and play.
2. Just insert the adapter into an appropriate power socket to turn on the string light
and unplug it tt, no need to install bulbs.
Download the “Tuya” or “Smart Life” APP from APP store (for IOS) and Google play
store (for Android), or scan the below QR code t
are, and register
with phone number/ email/social media account.
1. APP Download
+BLE
A
WIFI
Tuya
Smart Life
Bluetooth
2. How to link APP to string lights
Step 1.
Step 2.
Step 4.
Step 3.
cht is blinking slowly.
Step 5. Connect your mobile phone to the device’s hotspot.
Step 6. Go back to your phone’s WLAN set, choose virtual router "SmartLife-XXXX”.
Step 7.
the APP successfully.
Note:
the string light will stop blinking, please restart st
1 23 41 2 5 6
Thank you for purchasing Smart LED String Light, please read this user manual
carest, we will introduce some of the important features and opera
procedures of this products, please keep this manual in a safe place for future
reference.
User Manual
1 × LED String Light
1 × DC12V 1A Adapter
1 × Remote controller
1 × User manual
Package Lists
Smart LED String Light
Specifica
Voltage
LED Bulb
Light Source
String Length
Bulb Qty
Color Temperature
AC100-240V 50/60Hz
12V 0.5W/pcs LED
LED
50FT
25pcs+1spare
Adapter
Connectable
Usage Method
DC12V 1A
2pcs
WIFI + Bluetooth
(Three
Can support Alexa and Google assistant voice control
-1-
-2- -3- -4- -6--5- -7- -8- -9-
User Manual
Smart LED String Light
Three in One c
Bu on Control
WiFi
3 4
-10 -
When you enter the APP, you can see three sections: white, Scene and Music Sync.
3.1. thWhite: is is the brightness change, left and right sliding brightness axis can
easily change brightness from 1%-100% .
1 21 2
5 6
7 8
-11- -12- -13-
3 4
-14-
5 6
-15-
7 8
-16- -17- -18- -19-
MADE IN CHINA
(Waste Electrical & Electronic Equipment)
2. Do not repair, disassemble, or modify the product without approval.
3. Do not place the light near any heat sources.
4. Please keep it away from children.
5. Please keep the light dry and clean.
6. Please do not hang anything from the string lights as the extra weight may break
the light wire and cause poten
e hazard.
7. Although our lights are built with safety measures, we do not recommended
leaving the light una
ended or turning on permanently.
8. Please pull of the plug when it is not in use.
er before installing the bulb.
10. If you want to connect more sets string lights, need to change a bigger power
adapter.
arnings
Correct Disposal of This Product
This marking shown on the product, or its literature, indicate that it should not be
disposed with other household wastes at the end of it is working life.
Household user should contact either the retailer where they purchasing this
product, or their local governmenor details of there and how they can take
this items for environmentally safe recycling.
Business users should contact their supplier check the terms and c
purchase contacts, this products should not be mixed with other commercial waste
for disposal.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
-20-
2700K
Bluetooth
3.2.Scence: APP preset four scences, such as Night, Read, Working, Leisure.
The preset scences arehem by pressing the “Edit”
.
(Details in P14-P15)
For more scences, you can click in the lower right corner “Add Scene” to
design. And then follow P14-P15 again.
06:20
1Ft
1Ft
2.5Ft
2Ft
50Ft
1Ft
2.3 Bluetooth mode quickly blink connec�on.
light string.
Step 1. Please turn on the bluetooth on your phone.
Step 2. Plug in adapter to the socket, and the string light enters to quickly blink status. Go
to step 3...
quickly blink status. Go to step 3...
Step 3.
Step 4.
Step 1.Plug in the adapter into the socket and the bulbs will blink rapidly, then go
directly to step 2.
Step 2.
(BLE+Wi-Fi)”.
Step 4.
Step 3.
device is added to the APP successfully.
Note:
2.2 Hot Spot connec�on (AP mode slowly blink connec�on)
4. Scence Flash Mode: Sta�c/Flash/Breath are op�onal.
speed.
5.Music rhythm: When you turn on the music rhythm mode, the light string will
5.1. Open the music APP of the mobile phone that controls the light string, click to
play music, and the light string will rhythm with the music.
5.2. When the mobile phone connected to the light string is not playing music, the
mobile phone will receive other sounds and follow the rhythm.
Tip: If you leave the music rhythm mode, the rhythm will stop.
6.Other fun�ons
6.1.Timer:
6.2.Plan:
6.3.Rhythms:
brightness change mode can be "Linear 1—direct change" or "Linear 2—gradual
change".
6.4. Power-on behavior:
Do not disturb mode:
sleeping person. You need to click the switch to turn it on again.
6.5.Share device:
Other, click “Add Sharing”, and then choose the way you like to share.
7.Link LITSHEEN Smart String Lights to Alexa/Google Assistant
Alexa/Google Assistant.
Note: If you choose “View more ways to link”, click "Link with ACCOUNT
Key Steps to Link the Alexa Skill
· Search for the "Smart Life/Tuya", and tap "Enable" to enable the Skill.
· Enter the Smart Life/Tuya APP account and password, then tap "Link Now" to link
your Smart Life/Tuya account to enable the Skill.
Note: If you can't use the voice control correctly, try to disable the skill from Alexa
APP then re-enable it again.Or reconnect the string lights to Smart Life/Tuya App
(Search APP name on the Apple APP Store /Google Play to download the APP).
quickly blink status. Go to step 2...
Plug in the adapter into the socket and the bulbs will blink rapidly, please
blink status. Go to step 2...
the string light to quickly blink status. Go to step 2...
(BLE+Wi-Fi)”.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.