Installation Instructions

Remember the groud wire to be connected ,so as not to
cause electric shock in the product immersion in the rain.
Plug directly into the socket, can be powered to use
For your safety ,please install under professional guidance.Please
Make sure the power is off before wiring.
IP Grade-IP66
If you don’t know the protection level,please to the chart,the third(IPXX)for dust level, the fourth
(IPXX) for waterproof level.Do not soak the lamps with insufficient protection under water for a
long time!
Placement and installation method
Instructions before installation:
1. Arrange all kinds of parts for supporting lamps.
2. Check the input voltage,power and other parameters of lamp carefully before installation.
3. Make sure the power is off before installation.
4. Make sure that the core of the core of the external power line does not leak out when wring.
Installation Diagram
Dustproof Level
Waterproof Level
0
No protection
No protection
1
Prevent the invasion of
large solids
There will be no effect on housing if drip
drops into it.
2
Prevent the medium size so
lids from invading
When the housing tilts to 15degrees, there will
be no effect on housing if drip drops into it
3
Prevent the small solids from
invading
There will be on effect on housing if water or
rain drops into it from 60 degrees.
4
Prevent the solid which is
greeter than 1mm from
invading
There will be no damage on housing if throw
the liquid to it from any directing
5
Prevent hamful dust from
accumuiation
There will be no any damage if washing with
water
6
Compieteiy prevent dust
from entering
Can bused in the cabin environment
7
it can be soaked in water for a short time
8
Under certain pressure it can be soaked in
water for long