User's Manual

14
Usage tips
Using Babelens at a friend’s house
When going to a friend’s house or travelling you need your:
● Babelens Video Monitor
● Babelens Video Monitor power supply
● 1m network cable
● Smartphone
● Friend’s Wi-Fi password
Connecting Babelens Video Monitor to someone else’s network:
1 Connect Your Babelens Video Monitor to your friend’s router with
a network cable
2 Connect your Smartphone to your friend’s Wi-Fi network
3 Open the Babelens app and open settings when your Babelens
Video Monitor is connected
4 Open Wi-Fi setup and input your friend’s Wi-Fi password
5 Wait for Babelens Video Monitor to verify connection
6 Remove network cable and the Babelens Video Monitor is ready to use.
Use Babelens on multiple Smartphone
You can use Babelens with more than one Smartphone at the same time.
Due to home network bandwidth limitations, we do not recommend
using more than 3 devices to access the Babelens Video Monitor at
any one time for better video performance.
15
Need further help?
If you need more help or wish to communicate with other Babelens users
about the product, visit our support centre: http://support.babelens.com
Babelens Video Monitor Warranty
● Should this product prove faulty within 12 months of purchase due to a
materials or manufacturing fault please return it to the original place of
purchase.
● For guarantee purposes proof of purchase will be required.
● We recommend that you retain your receipt and attach it to this guide,
which should be kept in a safe place.
● The manufacturer does not accept liability for damage arising from
abuse, misuse or negligence.
● This guarantee is not transferable and therefore does not apply
to second-hand products.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.