User's Manual

7
The Babelens Video Monitor
6
You will also need:
Power supply
With UK/US/EU
plug attachments
Ethernet cable
Use to setup the Babelens
Video Monitor
A smart device
Smart phone or Pad running
iOS or Android system.
A spare Ethernet port on
your router
Just for setup. Your router
was most likely given to you
by your Internet provider.
Your Wi-Fi Password to
your home network
For the same router your
Babelens is plugged into.
Not needed for network
cable connection.
Mounting screws
For wall or ceiling mounting
Babelens Video Monitor
To monitor your baby
Monitor stand
To place on a flat surface
or attach to the ceiling or
the wall
What’s in the box
2x
Power cable socket
Ethernet cable port
For setting up the Monitor
or to stay connected via cable
WPS button
WPS (Wi-Fi Protected
Setup) button to easily
connect with your WPS
compatible Wi-Fi Router.
Rear
Status LED
Lens
Light sensor
Detects when to
automatically switch
to night vision
Infrared LED
Lights up room
with invisible light
Front
Speaker
Reset button
Will reset the Monitor to
factory default settings