User's Manual
Table Of Contents
- 1.0 Introduction
- 2.2.3 Camera Live Menu Function Introduction
- 3.0 Wi-Fi Wireless
- 4.0 Remote Access Setup
- 5.0 Camera Settings
- 6.0 Troubleshooting
- 7.0 Installation Instruction
- 7.1 3G Solar Camera Install
- FCC STATEMENT :
- This device complies with Part 15 of the FCC Rules
- (1) This device may not cause harmful interference
- (2) This device must accept any interference recei
- Warning: Changes or modifications not expressly ap
- NOTE: This equipment has been tested and found to
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
- FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposur
- 80 -
[Reset] Click Reset to initialize the camera to default factory settings. All users and settings will be lost, requiring
you to reconfigure the camera.
[Backup] Click Backup to back-up the current configuration of the camera for future reference. Once you have your
camera setup as you require, this is recommended.
To restore a backup file:
[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then click
Restore.
Note: Do not turn off the power during the Restore function since this might corrupt the camera’s firmware
5.9.5 Automatic Reboot Setup
[Auto reboot] Enable task to keep camera automatic self-checking the connectivity status.
[Reboot Time] Option to choose always or set a particular schedule.
5.9.6 Firmware Upgrade