User's Manual

- 72 -
Period Interval-- Time interval between snapshots. It allows you to designate a time (in seconds or minutes or hours) during
which new emails are suppressed. For example, if you want to avoid a flood of emails, you could set this time to
60 minutes so that you wouldn’t get any new emails for 1 hour.
Some email server settings to use your camera
with popular email providers: gmail.com gmx.com
SMTP server name: smtp.gmail.com SMTP server name: smtp.gmx.com
SMTP server port: 465 SMTP server port: 587
Secure SSL: Yes Secure SSL: No
Authentication: Yes Authentication: Yes
Username: [e-mail] Username: [e-mail]
Password: xxxxxxx Password: xxxxxxx
att.net comcast.net
SMTP server name: smtp.att.yahoo.com SMTP server name: smtp.comcast.com
SMTP server port: 25 SMTP server port: 587
Secure SSL: No Secure SSL: No
Authentication: Yes Authentication: Yes
Username: [e-mail] Username: [e-mail]
Password: xxxxxxx Password: xxxxxxx
Please note: The most common reason for Email Alerts not being sent is that the cameras Primary DNS IP Address is not
set. You can check this on your camera Settings System page.
If it is empty, you can set it on the TCP/IP settings page, set to your Default Gateway address and this should solve the
problem
6.8.4.3 FTP Alarm Sending/FTP Periodic Sending