User's Manual

‐ 65 ‐
[Enable] Enable task.
[Schedule] Option to choose always or set a particular schedule. Check Schedule setup to select the right schedule
ID for your task.
[Task] Task function. Click on the task to login the task setting screen below.
Click Apply to confirm your setting
[Post time]‐‐The number of seconds that the camera should keep alarm message sending after motion stops. If
there is any motion within this time the camera will keep sending alarms until there is no motion for the duration of
this parameter. It can be from 5 seconds to 24 hours.
[Alarm Interval]‐‐Number of seconds for which the camera should stop sending alerts after the first set. Setting the
time to 0 disables this feature. It
allows you to designate a time (in seconds) during which new alerts are suppressed.
For example, if you want to avoid a flood of alerts, you could set this time to 3600 seconds so that after a motion
detectioneventyouwouldn’tgetanynewalertsforatleast1hour.
5.9 Tools Menu
The Tools menu is located on the right of the Settings screen. When you click on the word “Tools”, a sub‐menu of
setup options will be displayed.