User's Manual

‐ 55 ‐
visit http://www.pcpitstop.com/testax.asp
To reduce the chance of false alarms you would increase the threshold (move threshold slider to right) or decrease
sensitivity (move sensitivity slider to left) .
5.8.2 Motion Detection using other browsers(Firefox, Chrome, Safari)
[Window] Check this box to enable the window.
[Threshold] Determines at what point the alarm is triggered. A lower threshold means less motion is needed to
trigger the alarm. A higher threshold means more motion is needed to trigger the alarm. Threshold is indicated by
the blue bar when motion is detected.
[Sensitivity] Determines how easily the camera detects motion. Lower sensitivity means the camera is less likely to
detect motion. Higher sensitivity means the camera is more likely to detect motion.
To reduce the chance of false alarms you would increase the threshold (move threshold slider to right) or decrease
sensitivity (move sensitivity slider to left) .
Please note: Motion detection in other browsers uses the Adobe Flash plug‐in. You will
need to install the Flash plug‐in if you do not have it. To check you have the latest version
of Flash, visit http://updateflash.org
5.8.3 Schedule Setup
The alarm that the motion detection triggers can be set to be active or inactive at certain times of the week.