AWM50G-US （WT-mU-MTRa01）（AWM503g-WT） User’s Manual Part Name：802.11b/g Wireless Module Part No.：AWM50G-US Version：V1.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Revision History Release Date Revision Initials 1.0 2009-4-24 Initial release SH Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Table of Contents 1.INSTALL THE DRIVER-------------------------------------------------------------------------------------------- 5 2.CONNECT-------------------------------------------------------------------------------------------------------------- 8 3.MAKE INFRASTRUCTURE CONNECTION----------------------------------------------------------------- 9 4.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) AWM50G-US User’s Manual （WT-mU-MTRa01）（AWM503g-WT） 1.Install the driver Step1 Insert the installation CD into your CD-ROM driver, Double click the icon to start setup. Step2 Choose I accept the terms of the license agreement and click next to go on. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Step3 Choose Ralink Configuration Tool and click next to go on. Step4 Choose Optimize for WiFi mode and click next to go on. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Step5 Click Install to begin the setup. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Step6 Click Finish to end the setup. 2.connect Plug in your usb wireless LAN adapter, it will be recognized and auto installed. Just confirmed it like below: Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) 3.Make infrastructure connection Double click the icon in red circle You will see: You can click the button Rescan to find which AP is in range, they will show on the window. Choice one you want to connect, and click the button connect to finish the connection. An infrastructure connection is completed. Note: please choose correct channel setting up to your law.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) 4.Help information in RaUI How to find out which WIFI environment you are inside : How to find out your IP address: Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) 5.Make Ad-Hoc mode connection 5.1 Make an Ad-Hoc SSID Step1 Click the button Add to make the Ad-Hoc SSID: Step2 Choose the SSID and Network Type as blew,and click OK to go on. Step3 Clilk the PROF1 in the window，and you can see the information of Ad-Hoc SSID. 5.2 Setup static IP address for the Ad-Hoc link Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Step1 At its property page, double click item Internet Protocol (TCP/IP) Step2 You will get: Step3 Fill the IP address blank, example as below: Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Step4 Click OK to finish the setup. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) 5.3 Ad-Hoc setup for one point completed. 5.4 Setup another Ad-Hoc point as step a,b,c,d. 5.5 Ad-Hoc mode link accomplished. And you can visit each other. Note: To make an Ad-Hoc mode link, we should choice the same channel. Its static IP address should be in the same subnet, and the SSID should be the same too. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Appendix A: Terminology n ad hoc network A network composed solely of stations within mutual communication range of each other via the wireless medium (WM). n access point (AP) Any entity that has station functionality and provides access to the distribution ser-vices, via the wireless medium (WM) for associated stations. n Station (STA) Any device that contains an IEEE 802.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) Appendix B: Important Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AWM50G-US User’s Manual (WT-mU-MTRa01/AWM503g-WT) This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users,and The transmitter module may not be co-located with any other transmitter or antenna.As long as 2 conditions above are met, further transmitter test will not be required.
