AWU50G-W User’s Manual Part Name：802.11b/g Wireless Module Part No.：AWU50G-W Version：V1.
AWU50G-W User’s Manual Revision History Release Date Revision Initials 1.0 2009-6-24 Initial release SH Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual Table of Contents 1. PRODUCT OVERVIEW 5 2. KEY FEATURE 5 3. SPECIFICATIONS 5 4. INSTALL THE DRIVER 6 5. CONNECT 9 6. MAKE INFRASTRUCTURE CONNECTION 10 7. HELP INFORMATION IN RAUI 11 8. MAKE AD-HOC MODE CONNECTION 12 APPENDIX A: TERMINOLOGY 16 APPENDIX B: IMPORTANT NOTICES 17 Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.
AWU50G-W User’s Manual AWU50G-W User’s Manual 1. Product Overview The AWU50G-W is a 802.11b/g wireless Network Adapter that is used to implement the USB2.0 interface on Notebook computers. It delivers incomparable wireless performance for your device. As a value added Wi-Fi USB2.0 card, it provides 64/128/256 WEP, WPA/WPAPSK、WPA2/WPA2-PSK security as well. 2. Key Feature • IEEE 802.11b、IEEE 802.
AWU50G-W User’s Manual Europe(ETSI): 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) Japan(TELEC): 11b: 2.412 GHz ~ 2.484 GHz (CH1 ~ CH14) 11g:: 2.412 GHz ~ 2.472 GHz (CH1 ~ CH13) Modulation RX sensitivity Power consumption 802.11b :CCK,DQPSK, DBPSK 802.11g :OFDM 802.11b :11Mbps:≦-84dBm 802.11g :54Mbps:≦-70dBm 11b: RX: ≦ 226mA TX: ≦ 236mA 11g: RX: ≦228mA TX: ≦ 238mA Antenna PCB antenna Operating Voltage DC 5V Output Power Security Supported OS Dimension (L*W *H) IEEE 802.11b: Min Typical Max 11/5.
AWU50G-W User’s Manual Step3 Choose Ralink Configuration Tool and click next to go on. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual Step4 Choose Optimize for WiFi mode and click next to go on. Step5 Click Install to begin the setup. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual Step6 Click Finish to end the setup. 5. connect Plug in your usb wireless LAN adapter, it will be recognized and auto installed. Just confirmed it like below: Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual 6. Make infrastructure connection Double click the icon in red circle You will see: You can click the button Rescan to find which AP is in range, they will show on the window. Choice one you want to connect, and click the button connect to finish the connection. An infrastructure connection is completed. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
AWU50G-W User’s Manual Note: please choose correct channel setting up to your law. For example, ch13 is permitted in your country, and you set your router at ch13, while you choose ch1ch11 (default setting), you will never find the AP. So you should have to choose ch1ch13 in Advanced page as below. 7.
AWU50G-W User’s Manual 8. Make Ad-Hoc mode connection 8.1 Make an Ad-Hoc SSID Step1 Click the button Add to make the Ad-Hoc SSID: Step2 Choose the SSID and Network Type as blew,and click OK to go on. Step3 Clilk the PROF1 in the window，and you can see the information of Ad-Hoc SSID. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual 8.2 Setup static IP address for the Ad-Hoc link Step1 At its property page, double click item Internet Protocol (TCP/IP) Step2 You will get: Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual Step3 Fill the IP address blank, example as below: Step4 Click OK to finish the setup. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China. Tel:+86-755-26030800 26030361 26030362 260630363 Fax:+86-755-33300672 Http://www.allwins.com.
AWU50G-W User’s Manual 8.3 Ad-Hoc setup for one point completed. 8.4 Setup another Ad-Hoc point as step a,b,c,d. 8.5 Ad-Hoc mode link accomplished. And you can visit each other. Note: To make an Ad-Hoc mode link, we should choice the same channel. Its static IP address should be in the same subnet, and the SSID should be the same too. Shenzhen Allwins Technology Corporation Add:9/F,Block A,Tsinghua Hi-tech Park,Nanshan,Shenzhen,China.
AWU50G-W User’s Manual Appendix A: Terminology n ad hoc network A network composed solely of stations within mutual communication range of each other via the wireless medium (WM). n access point (AP) Any entity that has station functionality and provides access to the distribution ser-vices, via the wireless medium (WM) for associated stations. n Station (STA) Any device that contains an IEEE 802.11 conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM).
AWU50G-W User’s Manual Appendix B: Important Notices Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AWU50G-W User’s Manual This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users,and The transmitter module may not be co-located with any other transmitter or antenna.As long as 2 conditions above are met, further transmitter test will not be required.
