Product Info

hold down the power button for more than 3 seconds.
5.1.2 The battery power may be too low, please charge in time.
5.1.3 The battery may be in low battery protection, the normal charger
does not respond to charging, please try to use a charger with an
output power of 5V/1V to activate it.
5.2 The watch will shut down by itself
The battery may be too low, please charge.
5.3 The watch is used for a short time
5.3.1 The battery may not be fully charged, please maintain sufficient
charging time (at least two hours to fully charge)
5.3.2 Whether the charger or data cable is working properly, you can
try to replace the charger and data cable.
5.3.3 If the charging cable interface is well connected, you can try
again.
5.4 Bluetooth is not connected or cannot be connected
5.4.1 Please restart the watch once;
5.4.2 Please turn off the Bluetooth of the mobile phone, turn it on
again, and reconnect it once;
5.5 Sleep data is not accurate enough
Sleep monitoring is to simulate a person's natural state of falling
asleep and getting up, and needs to be worn normally; if it is worn too
late or when it is fallen asleep, errors may occur. There is no sleep data