User Manual

Printer：
Support 58mm thermal paper(57mm*40mm)
Open the printer through the printer cover on the printer (as shown in Figure 1)
Do not force open the paper tray to prevent the print head gear from being worn.
Follow the steps shown in the picture to load roll paper into printer box
Then pull out part of the paper from the outside of the tray
Tearing cutter(as shown in Figure 2), and close the paper (as shown in Figure 3)
×
√
2
1
3
Attention：If the printer prints out paper without any words
Check that the orientation of the paper roll is not reversed.
Back-Clip Print-Scan All in One Device
3