Back-Clip Print-Scan All in One Device User 's manual
Back-Clip Print-Scan All in One Device Features 1. Built-in thermal printer, which can print tickets, menus, invoices, etc. It can replace the PDA handheld terminal, which is used in various industries. There are at most one set and a wide range of applications. 2. The built-in high-precision QR code scanning module can accurately scan various 1D/2D barcodes such as payment, commodities, labels, etc. It is suitable for commercial, retail, cashier, warehousing, logistics inventory and other industries. 3.
Back-Clip Print-Scan All in One Device Attention 1. Read this user manual carefully before using this product 2. The charging voltage of this product is 5V1A or 5V2A. Do not use a fast charger . Please make sure you are using the original cable from package 3. Copyright and Patent Rights This product and its accessories (including firmware, software, documentation, appearance, etc.) has applied for a number of patents, copyrights and software copyrights. 4.
Back-Clip Print-Scan All in One Device 1.Appearance..................................................................................1-3 2.Printer Parameter...........................................................................4 3.Scanner Parameter.........................................................................5 5.Test Software Download..............................................................6 6.Environment...................................................................................
Back-Clip Print-Scan All in One Device 1.
Back-Clip Print-Scan All in One Device Printer： Support 58mm thermal paper(57mm*40mm) Open the printer through the printer cover on the printer (as shown in Figure 1) Do not force open the paper tray to prevent the print head gear from being worn.
Back-Clip Print-Scan All in One Device 2.Printer Parameter： Resolution 203DPI Print method Thermal Print speed 3-5inch/sec Print width 48mm Tear paper Yes Paper Roll 57MMx40MM Charging voltage 5V Communication Bluetooth Fonts GBK or code page+ASCII（2MB） Roll diameter 40mm English ASCII9×17/12×24 English,Chinese,Numbers,symbols,pictures,barcodes. Print content Working voltage: DC7.4V，3.
Back-Clip Print-Scan All in One Device 3.
Back-Clip Print-Scan All in One Device 5.Test Software Download Pls download software from below website: https://www.pgyer.com/V6YR Or scan below QR code to download software (Currently,Support Android system only) （software） 1.Turn on Bluetooth, search for Barcode+Printer BT and click it to connect with your phone. 2.
Back-Clip Print-Scan All in One Device SDK can be downloaded from below website: https://share.weiyun.com/MMzfcghP Or scan below QR code to download software （SDK） 6.Environment： Working temp： 32°F to 104°F/0°C to 40°C Storage temp： -40°F to 140°F/-40°C to 55°C Humidity：5%-95% (non-condensing) drop specification： 1.
Back-Clip Print-Scan All in One Device 8.
Back-Clip Print-Scan All in One Device Scan Mode In this mode, trigger the scan by pressing the key Manual mode In sensing mode, the scan module will monitor the captured image, output the information after reading successfully, and re-enter the state of monitoring scene changes.
Back-Clip Print-Scan All in One Device Encoding format *Output GBK Output UTF8 Output UNICODE data output Positioning light Normal：The aiming light flashing during scanning only Always on: The aiming light is always in working state Always off: The aiming light is always off.
Illumination Back-Clip Print-Scan All in One Device Normal: The light will be turned on when scanning only Always on:The light will be turned on always when device power on Always off：The light always off Normal Always off Always on Terminator Add terminator Cancel terminator Add CR Add CR+LF Note: You need to turn on the add terminator before adding a carriage return or carriage return + line feed 11
Back-Clip Print-Scan All in One Device Reverse Setting Enable All reverse code Disable All reverse code Enable 1D revese code Disable 1D revese code Disable PDF417 reverse Enable PDF417 reverse Enable DM reverse Disable DM reverse 12
Back-Clip Print-Scan All in One Device Enable QR reverse Disable QR reverse case conversion Case inversion *Normal Capslock All lowercase *Enable Disable Invoice mode 13
Back-Clip Print-Scan All in One Device 9.SDK Class“PrinterInstance”provides the following method: a) //use BluetoothDevice PrinterInstance(Context context, BluetoothDevice bluetoothDevice, Handler handler) b) //use UsbDevice PrinterInstance(Context context, UsbDevice usbDevice, Handler handler) c) //use wifi address and port number PrinterInstance(String ipAddress, int portNumber, Handler handler) Handler: use for receive connect state change. Use constant value: PrinterConstants.Connect.
Back-Clip Print-Scan All in One Device g) Cut pager cutPaper() h) Ring buzzer, param is ring time ringBuzzer(byte time) i) Open cashbox openCashbox(boolean cashbox1, boolean cashbox2) 4. Set method： a) Set character encoding of print text. setEncoding(String encoding) b) Set character width and height. x is width, y is height. 0<=x,y<=7, default is 0. setCharacterMultiple(int x, int y) c) Set left edge distance of print area, usually nH value is 0. setLeftMargin(int nL, int nH) d) Set print model.
Back-Clip Print-Scan All in One Device Table class 1. Table construct. Table(String column, String regular, int[] columnWidth) Parameter column is table title column, separate by the regular. Such as:”index, unit price, number, price”. Parameter regular: the separator of the column data. Such as”,”. Parameter Column width: width of all columns. One Chinese character width is 2, one English character is 1. 2. Add a row data. addRow(String row) Add a row data to the table.
Back-Clip Print-Scan All in One Device Barcode class 1. Construct: Barcode(byte barcodeType) Barcode(byte barcodeType, int param1, int param2, int param3) Barcode(byte barcodeType, int param1, int param2, int param3， String content) i. barcodeType is barcode type. Constant start with “PrinterConstants.BarcodeType.”： One-dimensional: UPC_A， UPC_E， JAN13， JAN8， CODE39， ITF， CODABAR， CODE93， CODE128。 Two-dimensional： PDF417，DATAMATRIX，QRCODE。 ii.
Back-Clip Print-Scan All in One Device CanvasPrint class 1. Init CanvasPrint, Parameter is PrinterType. If use this method. The canvas was init to max width. Such as T9, the width is 72mm. init(PrinterType printerType) 2. Set font property. Parameter is a FontProperty type, setFontProperty(FontProperty fp) FontProperty is a collections of font property. User can call method of setFont() to set detail property.
Back-Clip Print-Scan All in One Device Enable USB Host API support 1. adb pull /system/etc/permissions/tablet_core_hardware.xml 2. Update that file and create android.hardware.usb.host.xml as specified by Greg-q. android.hardware.usb.host.xml contains the following lines: 3. adb push android.hardware.usb.host.xml /system/etc/permissions 4. Push handheld_core_hardware.xml or tablet_core_hardware.
Back-Clip Print-Scan All in One Device 10、Disclaimer The company does not assume any responsibility for losses caused by natural disasters (such as earthquakes, floods, etc.) that exceed our ability to act. The company is not responsible for any product liability associated with or arising from the application or use of any product, circuit, or other application described herein.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
