User's Manual

Smart Pass Management Platform User Manual
Smart Pass page68
1: Indicates automatic closing mode (high effective-default low level, then high level for X
seconds, and finally low level). That is, after opening the relay, a delay of X seconds will
automatically close.
2: Indicates auto-close mode (active low-default low level, then high level for X seconds, and
finally low level). That is, after opening the relay, a delay of X seconds will automatically close.
Delay time: The default unit is 5 seconds and the maximum value is 63 seconds.
8.2.13 Others
⚫ Upgrade firmware of temperature module
The firmware of the temperature measurement module can be manually upgraded through
application settings. First insert the U disk, and then enter the temperature measurement module
upgrade function of the application settings to select the firmware that can be upgraded for
manual upgrade. After the upgrade, you can view the version number of the new firmware of the
temperature measurement module. (The firmware file needs to be placed in the root directory of
the U disk, and the file name must be updateTemp.bin
⚫ Callback settings
1）This setting includes on and off.
2）On: You need to enter the callback address, the callback address is implemented according to
the callback interface document provided by us.
3）Off: The callback function is turned off, the recognition record is not callback.