User manual OTR wood portable FM radio & Bluetooth speaker MW-2I
Product Diagram Panel 1 Frequency Modulation (FM) 2 Frequency Scale 3 Switch for Power and Function Selection 4 Volume Adjustment 5 Status Indicator Back Board 6 Multi-functional USB Socket（Charge, AUX IN) 7 Charging Status Indicator Product Usage Power Source Power supply by inner rechargeable lithium polymer battery (3.
(Picture 1, position3) Twist the knob to BT (Bluetooth) function, then you will hear sounds “Di Di” for matching preparation, while indicators (picture 1, position 5) flashes white light. Take out blue device such as your cellphone, search the MUZEN OTR Metal Bluetooth, and click to connect. The light keeps white after connected when you can open the player for music. Usage for AUX INPUT The radio is allowed to connect external signal (cellphone MP3, iPad, PC, etc.
Charging of MUZEN OTR OTR products are generally full charged within three hours, so please turn off the charger or pull out the charging line after charging for three hours. There’s an indicator on the left side of the charging port: red light means charging, green light means fully charged. OTR products have no standard charging adaptor, you can use cellphone charger of 5V (500mA-2I), or plug in a PC USB interface. Durability of OTR Battery The inner 1000mAH lithium polymer battery has passed UN 38.
Bluetooth, and then the problem can be solved usually. However, if the devices are notebook, PC or else that produced in early years when Bluetooth Protocol is imperfect, they may fail to re-connect. And if the sound is not smooth in short distance, mostly because of the shared frequency interference under the 2.4G OTR environment. Please swift to another environment or change Wi-Fi to the 5.8G channel under this circumstance.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Keep me well! 1. Use after fully charged, then I can sing for you. 2. Reception performance requires good using circumstance. When receiving radio station, please be patient and twist the knob slowly, or you will miss other wonderful shows. Note: Keep away from interference source, be closer to the window when using indoor. (Only for MW-2I) 3. Each functional switch should be set on the right place when I use the radio, and be aware of the volume in case making troubles to others.
