User's Manual

3. Turn on the remote control unit and select the channel

needed.

4. Press the [sound ] button of the remote control ..

5. When the pairing is successful, the collar LED light will be

off, and the [signal icon ]of the remote control will also

display the signal strength.

If the pairing is not successful, the remote control unit will

automatically exit the pairing after 60 seconds.

13.Channel selection

1. The remote control unit can select the channel when it’s on

or standby.

2. Press the [turn left ] button to subtract from the

channel selection, press the [turn right ] button to increase,

and the digital display of the selected channel will flash, channels

1-9 can be selected.

3. Press the [confirm ] button to complete the channel

selection.

14.Strength selection

1. The remote control unit can select the output intensity of

sound, vibration and static electricity when it’s on or standby.

2. Press the [increase ] button to increase the intensity ;

press the [decrease ] button to reduce the intensity , and the

selected intensity digital display will flash, intensity level 1-9 can be

selected.

3. Press the [confirm ] button to complete the strength

selection.

15.Sound function

1. The remote control unit can send a signal to trigger the

collar unit to send out sound when it’s on or standby.

2. Press the [sound ] button of the remote control unit to

send the signal.

3. Press and hold the button continuously to send out the

signal, and it will stop automatically after 15 seconds.