User's Manual

14
10
16.Vibration function
1. The remote control can send a signal to trigger the collar
unit to generate vibration when it’s on or standby.
2. Press the [vibration ] and [unlock ] buttons of
the remote control at the same time to send signals.
3. Press and hold the button continuously to send out the
signal, and it will stop automatically after 15 seconds.
4. By default, the vibration function will produce sound at the
same time,can also choose to turn off the sound.
17.Electrostatic function
1. The remote control can send a signal to trigger the collar
unit to generate static electricity when it’s on or standby.
2. Press the [electrostatic ] and [unlock ] buttons of
the remote control unit at the same time to send signals.
3. Press and hold the button continuously to send out the
signal, and it will stop automatically after 15 seconds.
5. By default, the electrostatic function will generate sound at
the same time, can also choose to turned off the sound.
18.Accompanying sound
1. By default, sound will be generated simultaneously when
vibration and static electricity are generated, The [sound ]
symbol displayed on the LCD screen according to the sound
on/off.
2. For the accompanying sound on/off, press the [sound ]
and [unlock ] buttons of the remote control continuously for
3 seconds.
19.Training feedback
The sensor inside the collar unit can detect the intensity of
pet's stress action after being stimulated by sound, vibration and
static electricity, and send the intensity signal to the remote
control . After receiving the signal, the remote control generates
the corresponding vibration intensity, the user can intuitively see