Instruction Manual

8
Troubleshooting
Question 1: what is "Lo" when part of the temperature is measured
in the same environment
Why?
Answer: the measurement distance is too far. At this time, the
measurement may be the empty temperature. The instruction
requires 1cm
~15 cm distance.
Question 2: what is the temperature correction setting function
in the product?
Answer: the temperature correction setting function in the
product is to calibrate the temperature. If you want to select
more groups in public places (such as schools, airports, customs,
etc.), you can not use this function. The product has been
adjusted when it leaves, Just press the measurement key to make
the temperature; if you want to make the product at home (like a
child), and want to get more accurate temperature measurement
effect, it is recommended to calibrate the silver or electric
contact thermometer when you make the temperature.
Question 3: is the product harmful or radiated?
Answer: the principle of the product is to calculate the
temperature by collecting the radiation infrared of the object.
The product does not contact the object directly. The contact
intelligent infrared thermometer produced by our company is
radiation, so we hope that the consumer will release the
radiation for the injury.
Often question 4: is the product quality problem when all
objects are measured and alarmed?
Answer: this kind of phenomenon is generally caused by the
setting problem of the product. Please refer to the manual to
adjust the temperature correction of the product to the default
value. The specific method is to set the temperature correction
of the product to 0.0. If you have any further questions, you can
contact the after-sales service center directly. At the same time,
set the alarm temperature to the normal range.