User Manual

Backup or Reset

Note:

1. Do not turn off the power during the Reset to Factory Default. It may interrupt the NC601 operation.

2. If Reset to Factory Default is used, all user settings will be lost, and you will have to reconfigure the entire camera.

[Reset] Initialize all the parameters to the factory default. Note that all customer-applied settings will be

lost, requiring you to reconfigure Network Camera.

[Backup] Backup the present configuration for future reference.

[Search...] Search for the very backup configuration and click Restore to restore the configuration to your

Network Camera.

[Restore] Click

Restore button to start restoring a former backup settings