User Manual

INTRODUCTION
Thank you for your interest and support in our product and purchasing this wireless home network camera.
This product
eel confident that you will be pleased with the quality and features of this product.
works at ISM-2.4GHz frequency band, which could be legally used worldwide without
permission. We f
Notice
This product may cause interferences with other wireless equipment that operates at 2.4GHz ISM band.
Please turn off one of the equipments to eliminate the interference.
Product Assurance
This camera will emit electromagnetic wave, just like other wireless products. But its transmitting power is
lesser than other wireless products such as mobile phones. The 2.4GHz wireless camera meets wireless
frequency security standards and recommended indexes while working. These standards and indexes are
certificated by academic organization and represent the
cogitative research of the scientific workers who
continuously explore and annotate the involved fields. So we believe that our products are safe for
customers.
1
All our products meet the requirements of approval FCC or CE, and are granted the FCC or CE
certification. They are authorized to bear FCC or
CE mark.
Approval Information
After testing the product, we confirm that it complies with the provision for class C digital equipment in the
15th part in FCC regulation; and the receiver complies with the limitations for class B digital equipment in
Part 15 of FCC regulation. The product generates, applies and emits radio waves.
It might cause harmful
interferences to wireless communication if not be installed and used following the description of the manual.
The product may cause interference in residential area, and the customer should take remedies to
eliminate the interference at their own costs. If the product causes any harmful interference to wireless
equipment or disturbs the receiving of TV signals (it can be identified by turning on and off the product),
you can solve the trouble by following methods:
FCC
This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC
Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority
concerned and is authorized to bear CE mark.
CE
This product meets the requirements specified in Part 15 of FCC Regulation. Operation rests with the
following two conditions:
(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible interference caused
by operation mistakes.
(1) Readjust the product or put it in another place;
(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help.