User Manual

FTP Alarm setup

NC601

can also transfer the image via FTP. The alarm/timer trigger can be set on Motion

Detection window.

[Motion detection] Trigger to the alarm

[Periodical send] Trigger to the alarm

[Interval time] Sending image frequency when the trigger is Periodical send

[FTP server name] It can be domain name or IP address

[FTP server port] The default port number is 21

[Anonymous] Enable or disable anonymous visiting

[User name] Type your user

name

[Password] Type your password

[Re-type password] Re-type your password

[Passive mode] Apply passive mode or not

[Remote path] Path to FTP server where to save the alarm images

Click on Apply to confirm your settings above.