User Manual

ALARM

Motion Detection

As the alarm/timer trigger, Motion Detection can activate the Image Transfer feature, which can send the

images via e-mail or FTP (File Transfer Protocol). The alarm/timer trigger can be set on this window.

[Window] Up to four windows for you to detect and alarm.

[Threshold] Setup the threshold, once exceed

the limit, alarm will be triggered.

[Sensitivity] Set the measurable difference between two sequential images that would indicate motion.

Note:

1. When remove a window (for example, Window 1, to another place, please press Apply to

make the new detective area in effect) .

2. Only the checked window area is effectively set for alarm.

3. It is easier to trigger the alarm that you slide the slide block

of to left and that of

the sensitivity to right.

threshold

The checked window is effectively set as an alarm trigger.

External Sensor Input of External I/O activates the alarm trigger