User Manual

PREPARATION
Network Camera Installation
The NC601 can be located on the wall or ceiling. Please follow the steps below to install NC601.
1. Mounting without the universal bracket
The NC601 can be mounted on the wall or ceiling with the mounting plate directly.
1.1 Locate the plastic mounting plate to the NC601 with screws.
1.2 Drill four holes on the mounting surface according to holes in the metal mounting plate. Insert the
anchors into the holes, then
align the metal mounting plate with the holes you just drilled and drive the
screws through the metal mounting plate into the anchors, then hang the NC601 on the metal mounting
plate firmly.
9
s
s
e
l
e
r
i
w
s
s
e
l
e
r
i
w
s
s
e
l
e
r
i
w