User's Manual

The whole connection is finished! Then you can see the back
situationsvia the LCD monitor.While reversing, the LCD
monitor will display the back situations. However, it will
convert into standby mode in non-reversing status.
Maintenance
Do not shake or strike the product.
Do not disassemble or repair the camera; doing so
may cause damages to the product.
Do not use solvent such as gasoline, cleaner or
antistatic spray to clean the screen.
Turn off the camera/receiver if the system is not
in use.
The camera/receiver can only be completely
disconnected from the mains by unplugging the adapter.
Do not cut the DC power cable of the apparatus
to fit with another power source.
SPECIFICATIONS
Imaging Sensor CMOS
CMOS Total Pixels 510*492(NTSC) /