User's Manual

Channel buttons: CH1,CH2,CH3,CH4
Click the right channel button to monitor image transmitted from the
corresponding channel camera.
Note: You can also press space key on your keyboard to select channel from
CH1~CH4 in turn.
Four channels to avoid interference: CH1=2,414MHz, CH2=2,432MHz,
CH3=2,450MHz, CH4=2,468MHz
Channel loop button
Click the channel loop button to start looping available channels. Click
channel loop button again to stop looping.
Channel on/off buttons
Click the channel on/off button to enable/disable the channel.
Mute button
Click the Mute button to turn off the sound.
When the sound is on, slide the volume slide block horizontally to adjust
the volume.
Split screen button
Click the split screen button to switch between single window and four
windows display.
The single window for one channel and four windows for four channels.
Snapshot button
Click the snapshot button to take a snapshot.
Refer to page 24 for more details.
Record button
Click the record button to start recording.
Refer to page 23 for more details.
Zoom in/Zoom out
Click zoom in button to magnify the image and zoom out to return to the
normal size.
Zoom in 2×, 3×, 4×
17