User's Manual

The camera can stand on table, it also can be mounted onto the wall.
The steps of installation are as follows:
1. Drive one hole in the wall. Insert one mounting anchor firmly. Insert a
screw into the mounting anchor. Hang your camera on the screw.
Fix the Camera
8
PREPARATION
The channel switch is marked with 1-2-3-4. Any one of them can be
selected to meet the purpose of the multi-camera working and possible
interference avoidance.
Camera Channel Setup
CH1=2,414MHz
CH2=2,432MHz
CH3=2,450MHz
CH4=2,468MHz
2. Connect the camera to the adapter. Turn on the camera by sliding the
power switch to ON position. The power indicator lights up.