User's Manual

16
D. SYSTEM SETUP---Select the item SYSTEM by pressing CH+/CH-
button and press VOL+/VOL- button to enter special setup page as
below:
You are allowed to adjust col system, scan time, welcome screen,
initialization and version for the receiver in this page.
COL SYS.: You can choose PAL, NTSC or AUTO col in this page.
SCAN TIME: You are allowed to set scan time from 3s to 60s for channel
looping function.
WELCOME: When ON is selected, the word "WELCOME" appears after
the receiver is powered on; otherwise, when OFF, it will not.
INITIALIZE: Select INITIALIZE through CH+/CH- button; press VOL+/
VOL- button once and "YES?" appears; if you are sure to
resume the factory initial settings, press VOL+/VOL- button
again and "YES”appears, the settings are initialized.
Version: You can see the version in this page.
Press CH+/CH- button to select one item and press VOL+/VOL- button
to choose one desired option or adjust its value.
Press MENU button once to return to the main menu; twice to exit the
menu setting screen.
: SEL MENU: EXIT
: A
DJ
COL SYS.
SCAN TIME
WELCOME
INITIALIZE
VERSION
AUTO
3S
ON
NO