User's Manual

You are allowed to adjust the contrast, brightness, color, sharpness
and white balance in this page.
You should press CH+/CH- button to select one item and press VOL+/
VOL- button to adjust its value.
Press MENU button once to return to the main menu; twice to exit the
menu setting screen.
A. PICTURE SETUP--Select the item PICTURE by pressing CH+/CH-
button and press VOL+/VOL- button to enter picture setup page as
below:
33
33
33
33
CONTRAST
: SEL MENU: EXIT: ADJ
0
14
CONTRAST (Adjust the contrast of picture.)
BRIGHTNESS (Adjust the brightness of picture.)
COLOR (Adjust the color of picture.)
SHARPNESS (Adjust the sharpness of picture.)
WHITE BALANCE (Adjust the white balance mode of picture.)
PICTURE
MENU
ALARM
ALARM CH 1
ALARM CH 2
ALARM CH 3
ALARM CH 4
ALARM RING
SYSTEM
COL SYS. (Set the col system mode of picture.)
SCAN TIME (Set the channel scan time in multi-camera working.)
WELCOME (Set the welcome screen of receiver.)
INITIALIZE (Initialize all settings.)
VERSION (Show the version of picture.)
1
2
3
4
1
2
3
Set the alarm status of channels.
1
2
3
4
5
CHANNEL
CH 1
CH 2
CH 3
CH 4
1
2
3
4
Set the channel status of receiver.
4
5
5