User's Manual

PICTURE
ALARM
CHANNEL
SYSTEM
: SEL : OK MENU: EXIT
13
The OSD interface of this receiver facilitates your operation to achieve
the optimized effect.
1. Volume adjustment
Press VOL+/VOL- button to adjust the volume of the receiver.
2. Channel selection
Press the CH+/CH- button to select the matched channel.
3. Alarm mute ON/OFF
When abnormal situation occurs, the alarm sounds; press ALARM
button once to mute the alarm sound, it will not sound for the next
abnormal case detection unless you press the ALARM button again.
4. SCAN
In the multi-camera working mode, press the SCAN button once, all
the available channels will be displayed one by one (default interval
is 3s); press one more time to resume normal display.
5. MENU setup
Press the MENU button once, the main menu pops up.
Receiver Mode Setup