User's Manual

Table Of Contents

Note: For bigger size pictures, please connect the receiver to a monitor/TV with

AV cable. In this case, the LCD display will be disabled and turns black;

the speaker of the receiver or the earphone will be deactivated at the

same time.

Tip: Press and hold MENU button will turn off the LCD. Receiver will go to STAND

BY mode. If alarm is triggered, the LCD will turn on automatically.

5. Set the receiver channel same as that of camera by pressing CH+/CH-

continuously, and the pictures are displayed on the LCD screen.

CH+

CH-

Li-battery

Install the Battery Charge by Base Chareger

1. Press and hold the back side of the camera firmly and then pull the

base downwards to remove it.

The camera can stand on desktop, it also can be mounted onto the wall.

The steps of installation are as follows:

Fix the Camera