User's Manual

Table Of Contents

1. Connect the camera to the adapter (DC 8V 300mA). The power

indicator lights up.

Notes:

This camera can also work on dry battery ; please load 4 AAA batteries to the

battery compartment at the bottom of camera with their polarities matched.

And then slide the power switch to ON position, the power indicator lights up.

(Not suitable for wall installation)

INSTALLATION & USAGE

The AC adapter will work instead of batteries after it is plugged. If the camera is

left unused for a long period of time, please unplug the adapter and remove the

batteries.

The camera doesn’t have the charge function on the AAA batteries.

Installation

2. Set the camera to one desired channel (Please refer to Camera

Channel Setup section on page 12 for more detail).

Channel