User's Manual

The receiver can support up to 4 cameras working at the same time.
You are allowed to set the Mode Control as described below. The
Mode Control has the precedence over other buttons.
Default Setting
Receiver Mode Setup
CHANNEL
M
ON
OFF
11
Built-in IR lights for
15m Night Vision
The built-in Infra-red lights in camera provide night vision for 24hours
surveillance. The Infra-red lights will be automatically activated at night
or in dark places. The picture will turn to Black & White (monochrome)
in Night Vision status.
1
CH1 Enable (Default)
CH1 Disable
ON:
OFF:
2
CH2 Enable (Default)
CH2 Disable
ON:
OFF:
3
CH3 Enable (Default)
CH3 Disable
ON:
OFF:
4
CH4 Enable (Default)
CH4 Disable
ON:
OFF:
Channel Set
CHANNEL
M
ON
OFF
You can confirm which channel is set to receive signal from correspond-
ing camera. With this function, set the unused channels to OFF, so that
Night Vision