User's Manual

Camera Channel Setup
This camera has 4 selectable channels. You could adjust the channel
switch of the camera to set the channel for multi-camera working or
avoiding the interference. Please tune the channel switch on the power
switch to the desired channel as the following diagram.
CH1=2,414MHz;
CH2=2,432MHz;
CH3=2,450MHz;
CH4=2,468MHz
Channel Frequency
Default Setting
1 2 3 4
10
Fastener 1
360°
Fastener 3
360°
Fastener 2
90°
2. Adjust the angle
2.1 Revolve Fastener 1 and adjust the camera to an appropriate angle;
2.2 Revolve Fastener 2 and adjust the camera to an appropriate angle;
2.3 Revolve Fastener 3 and adjust the camera to an appropriate angle.
Tip: Fastener 1 and Fastener 3 can be revolved universally.