User's Manual

Fix the Camera
1.1 Drill holes on the mounting surface according to holes in the
universal bracket; Insert screw anchors into the holes;
1.2 Align holes in bracket, holes in the mounting surface, drive screws
through the bracket into the anchors. Adjust the angle of the
camera for surveillance.
1. Locate the camera
9
The camera can be located on the desk, floor, wall or ceiling. If you want
to fix the camera on the wall or ceiling please follow the steps below.
Note:
When locating the camera on the wall or ceiling you are recommended to adjust
the angle according to the above pictures.
Screw anchors
1.1
1.2
360°
1.2
On the CeilingOn the Wall
360°